Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterClopay Weather Seal Replacement: The Ontario Owner’s Guide
We stock and install Clopay-compatible bottom weather seal replacements throughout Ontario, CA, with most jobs priced between $120 and $240 including the seal, labor, and a documented photo record of the finished work. Same-day service is available when the part matches what’s on our trucks, and if it doesn’t, we measure and order the exact profile, then return once it arrives. Most Ontario homeowners discover the problem the same way: light bleeding under the door, a curled edge, or water pooling at the garage floor after a Santa Ana wind pushes rain sideways against the panel.
Which Clopay Models This Applies To
Clopay has used several bottom seal profiles across its residential lines, and they are not interchangeable. The IntelliCore and premium series doors generally take a bulb-style or T-style vinyl seal that slides into a single or double channel retainer. The older Classic and Value series doors, common on Ontario homes built in the early 2000s, often use a bead-style or U-shaped astragal with an aluminum retainer that spans the full door width.
Before you order anything, check the retainer. If you have an aluminum strip bolted to the bottom panel, the seal slides out sideways and the replacement must match the channel width, typically 1/4 inch or 3/16 inch. If the door has a screw-on retainer, the quickest path is to measure the seal’s top bead and blade height against whatever we remove. We handle the OEM-versus-aftermarket decision case by case. For current-model Clopay doors under warranty, we recommend the OEM seal. For doors out of warranty, quality aftermarket seals from manufacturers like BOWSEN or Action Industries often match or exceed the original at a lower price, and we carry both options.
Signs Your Clopay Weather Seal Replacement Is Failing
- Daylight visible under the door. The seal has compressed or torn away from the retainer, leaving a gap. In Ontario’s summer heat, vinyl seals harden and shrink, which pulls them out of the channel at the corners first.
- Water on the garage floor after rain. The seal’s bottom lip is no longer making contact with the concrete. This is common on homes in the Creekside and South Ontario neighborhoods where driveways slope toward the garage.
- A draft you can feel at floor level. The seal allows air movement year-round, which raises cooling costs during Ontario’s triple-digit Julys and lets cold air in during winter mornings.
- Visible cracks, flattening, or a chewed edge. Rodents gnaw through vinyl seals, and UV exposure over five or six Inland Empire summers will begin to visibly degrade the material.
- The seal drags or binds when the door operates. A seal that has partially pulled loose can catch the track or hang below the panel, causing the door to stutter on the way down or fail to close fully.
BeforeAfterReplacement Cost & What’s Included
In Ontario, Clopay weather seal replacement typically runs between $120 and $240 installed, depending on door width, profile type, and whether the retainer itself needs repair or replacement. A standard 16-foot door with a slide-in bulb seal lands at the lower end. A 18-foot door with a damaged aluminum retainer or a bead-style seal that requires full removal and reinstallation lands at the upper end. Your price is written before we start, per Clause 1 of The Haven Standard, and it includes the seal, the labor, alignment verification, and the documented photo record showing the old seal removed and the new one seated. We don’t quote one number and invoice another. The technician will name the part, quote the range, then do the work, and you’ll see the failed seal in a photo before we touch a tool. That’s Clause 4, and we’ve worked that way in Ontario since 2015.
DIY or Call Us?
Replacing a slide-in bottom seal is one of the few garage door repairs an owner can realistically handle, but it fails in the details. The seal must match the retainer profile exactly, the old seal must be fully removed (often with adhesive remnants cleaned), and the door’s close-force setting may need adjustment afterward so the panel doesn’t crush the new seal. The dangerous part of this job is not the seal itself, it’s working near a door that weighs 150 to 400 pounds on a spring system under high tension. If the door is off its travel or the seal replacement requires loosening the bottom bracket, that’s where a trained technician belongs. If you’d rather not spend a Saturday fighting a sticky retainer, call us at (951) 470-2012 and we’ll handle it with a written price before we start.
FAQs
Expect four to seven years in Ontario’s climate. The Inland Empire’s UV exposure and summer heat cycles harden the vinyl, and doors facing west or south without shade tend to degrade toward the shorter end. We see many original seals on Ontario homes fail around the five-year mark.
No. Vinyl weather seals cannot be reliably patched or glued. Once the material cracks, tears, or loses its shape, the seal must be replaced. Attempts to splice corners using adhesive fail within months because the seal flexes every time the door cycles. Call us at (951) 470-2012 for an exact replacement price.
A standard Clopay bottom seal replacement takes 30 to 45 minutes for a slide-in profile on a 16-foot door. If the retainer needs cleaning, repair, or replacement, plan for an hour to 90 minutes. We’ll tell you the expected time on the phone before you commit to anything.
We stock the most common bulb-style, T-style, and bead-style profiles for Clopay residential doors in 16-foot and 18-foot widths. If your door uses an uncommon profile, we’ll measure, order the exact match, and schedule the return visit. For immediate availability on your specific seal, call (951) 470-2012.
Still Need Help in Ontario?
If your Clopay door is leaking daylight or water at the floor line, call us at (951) 470-2012 for a free estimate and a written price before any work begins. Marcus Deller and the Servo Garage Doors Ontario crew serve homeowners throughout Ontario, including the neighborhoods off Haven Avenue, Archibald, and the 60 corridor. We stock seals for Clopay and also carry parts for LiftMaster, Chamberlain, and Genie openers when the issue turns out to be more than a worn seal. One call gets you a straight answer, a named technician, and a price you can hold us to.
Written by Marcus Deller, Owner, Servo Garage Doors Ontario at Servo Garage Doors Ontario, serving Ontario and nearby areas.